2012 Ford Fusion Sport FWD 3.5L V6 aka "Ruby"

Rob requested a QR Sticker to enhance their show!

With each additional member to Tuner Spotting, the automotive shows around us get more interactive.
Join Today!

Like

Rob updated their 2012 Ford Fusion Sport FWD 3.5L V6 bio

It's not often that you hear of someone modding a Ford Fusion. I didn't realize anthing could be done to a Fusion either until I came across the Fusion forums: http://www.fordfusionclub.com and http://www.fordfusionforum.com. Here's the mod list for my car, which is also my daily driver: Performance: Steeda Cold Air Intake; Steeda Throttle Body Spacer; Borla cat-back exhaust system; 93 octane tune from Tuning by James; Mazdaspeed 6 Big Brake Kit consisting of StopTech cross-drilled and slotted rotors, StopTech calipers, StopTech steel braided brake lines, and Hawk HPS brake pads. For suspension: Vogltand lowering springs; Koni adjustable dampening shocks; Steeda Front Strut Tower Brace; Steeda Street Rear Sway Bar with upgraded bushings; and AWR adjustable front and rear endlinks. For appearance: XXR 527 wheels (18x8.75+35et) wrapped with Bridgestone Potenza RE760 Sport Ultra Performance Summer Tires; Painted brake calipers using G2's Brake Caliper Paint system; 30% window tint; Stubby antenna; HD Lip (yes, from Home Depot - it's a MD Building Products rubber lower garage door seal); WeatherTech in-channel window deflectors; Steeda hood struts and a modified Lincoln MKZ engine cover. Thank you for viewing!

Like

Rob uploaded 6 photos to their 2012 Ford Fusion Sport FWD 3.5L V6

Like

Rob added 22 mods to their 2012 Ford Fusion Sport FWD 3.5L V6

Various Coilovers
MD Building Products HD Lip - yes, from Home Depot - it's a MD Building Products rubber lower garage door seal
WeatherTech In-channel window deflectors
Steeda Hood struts
Lincoln Modified MKZ engine cover
3M Window tint
WeatherTech Digital fit floor liners and trunk liner
Ford Ported upper/lower intake manifolds and throttle body
Vibrant Swap out Borla exhaust for custom Vibrant exhaust with 2.5-inch piping
CravenSpeed Stubby Antenna
G2 USA Brake Caliper Paint System (red)
XXR 527 wheels (18x8.75+35et) wrapped with Bridgestone Potenza RE760 Sport Ultra Performance Summer Tires
Steeda Cold air intake
Steeda Throttle body spacer
Tuning by James 93 octane tune
Borla Catback exhaust
Mazdaspeed 6 Big brake kit: StopTech cross-drilled and slotted rotors, StopTech calipers, StopTech steel braided brake lines, Hawk HPS brake pads
Vogtland Lowering springs
KONI Adjustable dampening shocks
Steeda Front strut tower brace
Steeda Street rear sway bar (22.5mm) with upgraded bushings
AWR Adjustable front and rear endlinks
Like

Rob uploaded a photo to their 2012 Ford Fusion Sport FWD 3.5L V6

Like

About:

It's not often that you hear of someone modding a Ford Fusion. I didn't realize anthing could be done to a Fusion either until I came across the Fusion forums: http://www.fordfusionclub.com and http://www.fordfusionforum.com. Here's the mod list for my car, which is also my daily driver: Performance: Steeda Cold Air Intake; Steeda Throttle Body Spacer; Borla cat-back exhaust system; 93 octane tune from Tuning by James; Mazdaspeed 6 Big Brake Kit consisting of StopTech cross-drilled and slotted rotors, StopTech calipers, StopTech steel braided brake lines, and Hawk HPS brake pads. For suspension: Vogltand lowering springs; Koni adjustable dampening shocks; Steeda Front Strut Tower Brace; Steeda Street Rear Sway Bar with upgraded bushings; and AWR adjustable front and rear endlinks. For appearance: XXR 527 wheels (18x8.75+35et) wrapped with Bridgestone Potenza RE760 Sport Ultra Performance Summer Tires; Painted brake calipers using G2's Brake Caliper Paint system; 30% window tint; Stubby antenna; HD Lip (yes, from Home Depot - it's a MD Building Products rubber lower garage door seal); WeatherTech in-channel window deflectors; Steeda hood struts and a modified Lincoln MKZ engine cover. Thank you for viewing!

  • WeatherTech Digital fit floor liners and trunk liner
  • 3M Window tint

  • Lincoln Modified MKZ engine cover
  • Steeda Hood struts
  • WeatherTech In-channel window deflectors
  • MD Building Products HD Lip - yes, from Home Depot - it's a MD Building Products rubber lower garage door seal
  • CravenSpeed Stubby Antenna
  • G2 USA Brake Caliper Paint System (red)

  • AWR Adjustable front and rear endlinks
  • Steeda Street rear sway bar (22.5mm) with upgraded bushings
  • Steeda Throttle body spacer
  • Tuning by James 93 octane tune
  • Borla Catback exhaust
  • Mazdaspeed 6 Big brake kit: StopTech cross-drilled and slotted rotors, StopTech calipers, StopTech steel braided brake lines, Hawk HPS brake pads
  • Vogtland Lowering springs
  • KONI Adjustable dampening shocks
  • Steeda Front strut tower brace
  • Steeda Cold air intake

  • XXR 527 wheels (18x8.75+35et) wrapped with Bridgestone Potenza RE760 Sport Ultra Performance Summer Tires

  • Ford Ported upper/lower intake manifolds and throttle body
  • Vibrant Swap out Borla exhaust for custom Vibrant exhaust with 2.5-inch piping
  • Various Coilovers

Similar Garages






  1. What is Tuner Spotting?

    We're an extension to modern automotive shows and events. Think of us as your own personalized digital build board